Paper embosing press operator
Also known as: paper embossing & debossing machine operator, paper embosser specialist, paper embosser worker, paper embossing and debossing press operator, paper embosser technician, paper embossing press technician
About this occupation
Paper embossing press operators use a press to raise or recess certain areas of the medium, so as to create relief on the print. Two matching engraved dies are placed around the paper and pressure is applied to change the surface of the material.
Essential skills and knowledge
- follow safety precautions in printing
- types of paper
- perform test run
- set up the controller of a machine
- operate electric embossing press
- monitor automated machines
- follow production schedule
- supply machine
- quality standards
- troubleshoot
- install embossing plates
- types of embossing
Typical tasks and preparation
From the related US occupation profile Printing Press Operators (O*NET 51-5112.00). Linked by an official crosswalk: related, not identical; details vary by country.
- Start presses and pull proofs to check for ink coverage and density, alignment, and registration.
- Examine job orders to determine quantities to be printed, stock specifications, colors, or special printing instructions.
- Adjust ink fountain flow rates.
- Verify that paper and ink meet the specifications for a given job.
- Collect and inspect random samples during print runs to identify any necessary adjustments.
- Feed paper through press cylinders and adjust feed and tension controls.
- Typical education (US)
- High School Diploma or the equivalent (such as a GED)
- Preparation
- Job Zone 2 of 5
- Interests
- Conventional, Realistic, Enterprising
Top skills: Quality Control Analysis, Operations Monitoring, Monitoring, Operation and Control, Reading Comprehension, Active Listening
US median pay: US$45,780 a year (2025), 144,260 employed. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics.
Subjects this work relies on
How important each subject's knowledge is in the job itself, rated by people doing it (1 to 5).
- MetalworkO*NET: MechanicalVery important (3.8)
O*NET data describe work in the United States; requirements differ by country. This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. CareerProof Global has modified all or some of this information; USDOL/ETA has not approved, endorsed, or tested these modifications.
Preparation needed
Job Zone 1-2: Very Little to Some Preparation Needed
- Most common education (US)
- High School Diploma or the equivalent (such as a GED)
- Education
- Usually requires a high school diploma or GED, though some occupations may not.
- Experience
- Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.
- Training
- Ranges from a few days to one year of on-the-job training.
O*NET data describe work in the United States; requirements differ by country. This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. CareerProof Global has modified all or some of this information; USDOL/ETA has not approved, endorsed, or tested these modifications.
Related occupations
Occupations O*NET links to this one by similar work, skills and knowledge.
- Paper Goods Machine Setters, Operators, and Tenders
- Prepress Technicians and Workers
- Photographic Process Workers and Processing Machine Operators
- Adhesive Bonding Machine Operators and Tenders
- Print Binding and Finishing Workers
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Cutting and Slicing Machine Setters, Operators, and Tenders
- Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
O*NET data describe work in the United States; requirements differ by country. This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. CareerProof Global has modified all or some of this information; USDOL/ETA has not approved, endorsed, or tested these modifications.