Wood treater
Also known as: wood treating machine specialist, wood treating machine operator, wood treatment specialist, wood treating machine worker, wood treating machine technician, wood treatment technician
About this occupation
Wood treaters apply treatments to wood to make it resistant to environmental factors like mould, cold, moisture, or staining. Treatments may also contribute to the colour of the wood. Wood treaters may use chemicals, heat, gasses, UV light, or a combination of these to treat wood.
Essential skills and knowledge
- record wood treatment information
- woodworking processes
- types of wood
- stack timber
- meet contract specifications
- wood moisture content
- treat wood
- manipulate wood
- clean wood surface
- mix chemicals
- supply machine
- wear appropriate protective gear
Typical tasks and preparation
From the related US occupation profile Woodworking Machine Setters, Operators, and Tenders, Except Sawing (O*NET 51-7042.00). Linked by an official crosswalk: related, not identical; details vary by country.
- Set up, program, operate, or tend computerized or manual woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, or wood-nailing machines.
- Examine finished workpieces for smoothness, shape, angle, depth-of-cut, or conformity to specifications and verify dimensions, visually and using hands, rules, calipers, templates, or gauges.
- Start machines, adjust controls, and make trial cuts to ensure that machinery is operating properly.
- Monitor operation of machines and make adjustments to correct problems and ensure conformance to specifications.
- Examine raw woodstock for defects and to ensure conformity to size and other specification standards.
- Adjust machine tables or cutting devices and set controls on machines to produce specified cuts or operations.
- Typical education (US)
- High School Diploma or the equivalent (such as a GED)
- Preparation
- Job Zone 2 of 5
- Interests
- Realistic, Conventional, Investigative
Top skills: Operations Monitoring, Operation and Control, Quality Control Analysis, Monitoring, Speaking, Critical Thinking
US median pay: US$43,380 a year (2025), 61,420 employed. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics.
Subjects this work relies on
How important each subject's knowledge is in the job itself, rated by people doing it (1 to 5).
- MetalworkO*NET: MechanicalImportant (3.3)
O*NET data describe work in the United States; requirements differ by country. This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. CareerProof Global has modified all or some of this information; USDOL/ETA has not approved, endorsed, or tested these modifications.
Preparation needed
Job Zone 1-2: Very Little to Some Preparation Needed
- Most common education (US)
- High School Diploma or the equivalent (such as a GED)
- Education
- Usually requires a high school diploma or GED, though some occupations may not.
- Experience
- Some occupations may need little or no previous experience; others require several months to a year of experience. For example, landscaping and groundskeeping workers might require very little training or previous experience, while agricultural equipment operators can benefit from on-the job training.
- Training
- Ranges from a few days to one year of on-the-job training.
O*NET data describe work in the United States; requirements differ by country. This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. CareerProof Global has modified all or some of this information; USDOL/ETA has not approved, endorsed, or tested these modifications.
Related occupations
Occupations O*NET links to this one by similar work, skills and knowledge.
- Sawing Machine Setters, Operators, and Tenders, Wood
- Cutting and Slicing Machine Setters, Operators, and Tenders
- Grinding, Lapping, Polishing, and Buffing Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Milling and Planing Machine Setters, Operators, and Tenders, Metal and Plastic
- Lathe and Turning Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic
- Multiple Machine Tool Setters, Operators, and Tenders, Metal and Plastic
- Textile Cutting Machine Setters, Operators, and Tenders
- Rolling Machine Setters, Operators, and Tenders, Metal and Plastic
- Forging Machine Setters, Operators, and Tenders, Metal and Plastic
O*NET data describe work in the United States; requirements differ by country. This page includes information from the O*NET 31.0 Database by the U.S. Department of Labor, Employment and Training Administration (USDOL/ETA). Used under the CC BY 4.0 license. O*NET is a trademark of USDOL/ETA. CareerProof Global has modified all or some of this information; USDOL/ETA has not approved, endorsed, or tested these modifications.